Iron Removers - Slurries
Iron remover lines for slurries have a surface on the grid with an operating principle that ensures full contact with the fluid which also makes the machine easier to clean, once disconnected.
Models: PZT 93-253, PZT 306 – PZP 200 – PZT 306 PLUS, FPT 1-2/140 – FPT 1-2/200, DLG 120 – 142 – 205 – 245 – 300 – 350 – 400, DLP 205 – 245 PLUS, DLS 205, DLS 205 PLUS, DEMAG 255 – 405 – 805
PZT 93-253: These models are filters for fluids, proven to operate well under capacity pressure utilizing permanent magnets. Its compact size, strong magnetic force from the neodymium bars and hermetic seals makes it particularly suitable for glazing lines, service tanks and along glaze transfer piping systems.
PZT 306 – PZP 200 – PZT 306 PLUS: These models are suitable for fluids and slurries and are used during glaze preparation, either as separate units or installed onto GRP trolley-mounted units with the vibrating sieves and transfer pumps.
FPT 1-2/140 – FPT 1-2/200: These models are cone-shaped iron-removing filters for fluids, equipped with an extractable magnetic core to facilitate cleaning. Suitable for controlling recovery water, engobe products, glazes with low viscosity and slurry.
DLG 120-142-205-245-300-350-400: These models are electrical gravity iron removing filters for fluids. It is used to clean recovery water, slurry and glaze. The surface of the grids and the operating principle guarantee full contact with the fluid and make it easier to clean, once disconnected.
DLP 205-245 PLUS & DLS 205-205 PLUS: These models are electrical gravity iron remover for fluids. It can be used to control recovery water, slurry and glaze. The PLUS version, with copper coil, guarantees double the magnetic force compared to the standard version.
DEMAG 255-405-805: These models are iron removers for fluids with an automatic cleaning system. The superior strength of permanent neodymium magnets were built into the rollers and this feature, coupled with the unique automatic cleaning system, makes it a very effective unit for controlling slurries and liquids.
– Food & Beverages
– Metal Powders
– Water Treatment.
Screening Foundry Salt at 1.5 mm cut point using a VTU-900 single deck
Screening Pine Nuts at 4 mm cut point using a VTU-900 single deck to eliminate skin