Dr Sonics Engineering > Products > Circular Single Deck

Circular Single Deck

CS line is circular multi-frequency single deck vibrating sieves that achieves unprecedented efficiency and capacity in separating fine particles (3mm down to 5 micron).

Models: CS-065.1, CS-095.1, CS-120.1

Circular single deck is tailored to suit your specific requirements and is offered in three distinct size models – 650 mm, 950 mm and 1,200 mm diameter.

CS 065.1: This model is the smallest size, designed for precision screening. It is perfect for laboratory activity, efficiently separating difficult to screen fine powders (from 10 micron to 3 mm).

CS 095.1: This model is the medium sized circular single deck sieve. It is perfect for a medium feed rate (50-2000 Kg/h), separating fine powders (from 10 micron to 3 mm).

CS 120.1: This model is the largest size circular single deck unit. It is perfect to screen medium-large feed rate (50-2500 Kg/h), for difficult to screen material.

Design characteristics:
– Single deck configuration with gas purging
– Additional accessories such as motor covers, different types of connections,stands, pneumatic lifting system, and clean-in-place systems
– Multifrequency vibration (MFV)
– Up to 500 G of acceleration passed to mesh eliminating clogging and agglomeration
– Two-side electric vibrating motors operating at 1,500 RPM, IP65
– All contact parts in AISI 304 stainless steel
– All contact parts can be customized with a mirror polish finishing
– Cover with suction and inspections holes
– High quality standards.

Use:
– Fine and ultra-fine screening of difficult to screen wet, dry, humid, sticky, abrasive or agglomerative material
– Used for classification, scalping, safety screening, de-dusting and solid/liquid separation

Design characteristics:
– Adjustable three – dimensional movement
– All contact parts in Stainless Steel 304 (AISI)
– Tie-rod and bolt clamping system & belt drive
– Connectable discharge outlets
– Standard mesh cleaning system
– Mechanical deck lifting system (upon request).

Use:
– Classification of dry fine powder by particle size
– Dedusting fine dry materials.

Advantages:
– Up to 500 G of acceleration passed to the mesh
– Significantly increases capacity of m2 screening area by up to 1,000%
– Overcomes sticky/humid material and self cleans the mesh
– Can screen materials down to 5 micron
– 99% efficiency in separation
– Breaks agglomerates
– Mesh replacement can be done in 20 minutes.

Industries:
– Food & Beverages
– Oil, Mining & Minerals
– Chemicals & Plastics
– Coatings
– Metal Powders
– Waste & Recycling.

Screening Silver Powder at 6 micron cut point using a CS-065 single deck

Tin, Copper and Silver Alloy separated at 6 micron cut point using a CS-065 single deck

Metal Powder Mix separated at 11 micron cut point using a CS-065 single deck

Screening Metal Powder at 11 micron cut point using a CS-065 single deck

Screening Metal Powder at 11 and 20 micron cut point using a CS-065 single deck

Screening Metal Powder at 15 micron cut point using a CS-065 single deck

Screening Aluminium Powder at 20 micron cut point using a CS-065 single deck

Screening Nickel Alloy at 20 micron cut point using a CS-065 single deck

Screening Synthetic Paraffin Wax at 20 micron cut point using a CS-065 single deck

Screening Zirconium Dioxide at 20 micron cut point using a CS-065 single deck

Screening Metal Powder at 25 micron cut point using a CS-065 single deck

Iron Powder separated at 25 micron cut point using a CS-065 single deck

Screening Aluminium Oxide at 30 micron cut point using a CS-065 single deck

Screening Zinc Bronze Powder at 30 micron cut point using a CS-065 single deck

Screening Zinc Oxide at 44 micron cut point using a CS-065 single deck

Screening Pigments at 44 micron cut point using a CS-065 single deck

Screening Aluminium Hydroxide and Aluminium Fluoride at 44 micron cut point using a CS-065 single deck

Screening Glass Powder at 44 micron cut point using a CS-065 single deck

Screening Titanium at 45 and 75 micron cut point using a CS-065 single deck

Screening Ceralite at 50 micron cut point using a CS-065 single deck

Screening Perlite at 50 and 25 micron cut point using a CS-065 single deck

Screening Perlite at 53 micron cut point using a CS-065 single deck

Screening Nickel based Alloy Powder at 61 micron cut point using a CS-065 single deck

Screening Zinc Powder at 80 micron cut point using a CS-065 single deck

Screening Mica Powder at 100 micron cut point using a CS-065 single deck

Screening Aluminium Powder at 100 micron cut point using a CS-065 single deck

Screening Tin Oxide at 100 micron cut point using a CS-065 single deck

Screening Quartz Sand at 100 micron cut point using a CS-065 single deck and RS-1506 single deck

CS-065 single deck screens Ceramic Microspheres at 100 and 40 micron cut point with high efficiency

Screening three different Cosmetic / Makeup Powders at 100, 250 and 500 micron cut point using a CS-065 single deck

Screening Gluten at 200 micron cut point using a CS-065 single deck

Screening Silicone at 200 micron cut point using a CS-065 single deck

Screening Tungsten Carbide Cobalt at 210 and 44 micron cut point using a CS-065 single deck

Screening Ferrosilicon at 300 and 4700 micron cut point using a CS-065 single deck

Screening Zinc Stearate at 425 and 210 micron cut point using a CS-095 single deck with no mesh blinding

Screening Sand at 500 micron cut point using a CS-065 single deck

Screening Silicone Carbide at 300 and 500 micron cut po

Screening Copper at 40 micron cut point using a CS-095 single deck

If You Need Any Ultrasonic Solutions ... We Are Available For You

Contact Us